1. Cutting

Cut the initial copper clad laminate into plates.

2. Drilling

Drill the hole diameter at the corresponding position on the sheet according to the material.

3. PTH

A thin layer of copper is deposited on the insulating hole wall by chemical method.

4. Exposure

Transfer the image on the production film to the board.

5. Plating

Let the hole and circuit copper layer be plated to a certain thickness (20-25um), and finally meet the requirements of the finished copper thickness of the final PCB board.

6. Film stripping

Use NaOH solution to expose the non line copper layer of the anti plating coating.

7. Etching

Corrode the copper layer of non line parts by chemical reaction method.

8.Soldermask

Transferring the green film pattern to the board can protect the circuit and prevent tin on the circuit when welding parts.

9. Silk screen and cure

Print the required text and information on the board.

10. Surface finish

Because bare copper is susceptible to moisture and oxidation if exposed to the air for a long time, surface treatment should be carried out. Generally, common surface treatments include tin spraying, gold precipitation, OSP, tin precipitation, silver precipitation, nickel palladium, electric hard gold, electric gold fingers, etc.

11. Profiling

Let the PCB be cut into the required overall dimensions by CNC molding machine.

12. Testing

Check the status of the analog board to see if there are defects such as short circuit.

13. Final inspection

Inspect the appearance, size, hole diameter, plate thickness, mark, etc. of the plate.