Rigid PCB Equipment

Fly probe tester for PCB board

Fly probe tester can check for short circuit, open circuit and component values; rapid test development; lower cost test methods; flexibility for rapid conversion and rapid feedback for designers in the prototype stage.

Get Price

Contact

Download

Product description

Technical specification

No.	Model	Specification
1	Model No.	SURPASS V6L
2	Test method	Resistance, phase deviation
3	Max. Test area	610×500 mm
4	Min. test area	76x76mm（no limit when use fixture）
5	No. of Flying Probe	2 front, 2 Rear
6	No. of CCD	2 front, 2 Rear
7	Board Thickness	0.3-6 mm
8	Repeatability	±10μm
9	Resolution	6μm
10	Min. Pad Pitch	120μm
11	Min. Pad Size	75μm
12	Power requirement	AC220V,8A
13	Air requirement	No need
14	Isolation test voltage	250V（optional :500V）
15	Open circuit test current	2.65μA-125mA
16	Isolation resistance	5MΩ-100MΩ
17	Open circuit resistance	2Ω-8kΩ （optional：0.4mΩ-800KΩ）
18	Board mount system	Manual clamping
19	machine weight	875 kg
20	Machine size	150x215x74 cm
21	Optional	Build in resistance and capacitor Easy Connec Vacuum system * 4 terminals test function * Auto marking system